M95 GYPSUM SPRAY PLASTER
TECHNICAL SPECIFICATIONS

Water/Plaster Ratio	5,4-5,8 lt / 10 kg
End of Setting	150-180 minutes
Limiting Single Coat Application Thickness (min.)	7 mm
Drying Time	4 days
Tensile-Bending Strength (min.)	1,0 N/mm²
Compressive Strength (min.)	2,5 N/mm²
Hardness	50 Shore D
Consumption (1cm thickness)	10.5 kg/cm2

SATEN FINISH PLASTER
TECHNICAL SPECIFICATIONS

Water/Plaster Ratio	6,5 lt / 10 kg
End of Workability	90 minutes
End of Setting	160 – 200 minutes
Consumption (1mm thickness )	1 kg/m2
Practical single coat application thickness	0,5mm
Drying Time (max.)	2 days
Water Absorption (by weigth)	%17
Hardness	50 Shore D
Tensile-Bending strength (min.)	1,0 N/mm²
Compressive Strength (min.)	2,5 N/mm²
Thermal Conductivity	0,30 W/mK (0,26 Kcal/mhc)

GYPSUM PLASTERBOARD
TECHNICAL SPECIFICATIONS
Higher strength and fire resistance with additional fiber content,
Fast, clean, drywall partitioning and false ceiling installation,
Maximum flexibility in design and application,
Easily accommodates both mechanical and electrical services,
High-performance heat and sound isolation possibilities,
Improvement in fire resistance,
Less dead load and ideal for secure construction in risky areas to Earthquake,
Smooth and sound surfaces for any kind of paint or wallpaper application

TYPES
(R)Regular Gypsum Plasterboard
(WR) Water Resistant Gypsum Plasterboard
(FR) Fire Resistant Gypsum Plasterboard
(WR+FR) Water & Fire Resistant Gypsum Plasterboard

ADHESİVE AND FIXING PLASRERS
TECHNICAL SPECIFICATIONS

ABS ADHESIVE FOR GYPSUM PLASTERBOARD
Water/Plaster Ratio	4.8 lt/10 kg
Compressive Strength (min.)	60 kg f/cm2
Bending-Tensile Strength (min.)	25 kg f/cm2
End of Workability	25 minutes
End of Setting	60 minutes
Fineness	% 10 retains on 0.2mm sieve
ABS JOINT FILLER FOR GYPSUM PLASTERBOARD
Water/Plaster Ratio	5.4 lt/10 kg
Compressive Strength (min.)	30 kg f/cm2
Bending-Tensile Strength (min.)	15 kg f/cm2
End of Workability	60 minutes
End of Setting	150 minutes
Fineness	% 0.0 retains on 0.2mm sieve
DUVAL GYPSUM PARTITION BLOCK ADHESIVE
Water/Plaster Ratio	7.0 lt /10 kg
Compressive Strength (min.)	30kg f/cm2
Bending-Tensile Strength (min)	10 kg f/cm2
End of Workability	40 minutes
End of Setting	90 minutes
Fineness	% 0.0 retains on 0.2mm sieve

DUVAL GYPSUM PARTITION BLOCK
TECHNICAL SPECIFICATIONS

Dimension	50x66.6x8 cm.
Density	1.0 kg/dm³
Partition Weight	84 kg/m²
Compressive Strength (min.)	50 kg/cm²
Bending-Tensile Strength (min.)	20 kg/cm²
Hardness	40 Shore-D
Sound Rating	39 dB
Vapour Diffusion Coefficent (µ)	4
Thermal Conductivity	0.31 kcal/mh°C
Thermal Transmittance (1/h)	0.26 m²h°C/kcal
Fire Resistance	3 Hours

MOULDING PLASER
TECHNICAL SPECIFICATIONS

ABS CERAMIC MOULDING PLASTER
Water/Plaster Ratio	%70
Spread Diameter	180 mm – 200 mm
Initial Setting	12-15 minutes
Final Setting	30-35 minutes
Compressive Strength (min.)	125kg f/cm2
Flexural Strength (min.)	50 kg f/cm2
Absorption Capacity (by weight)	%38
Fineness	% 0.0 retains on 0.2mm sieve
Hardness	60 shore D.
ABS PLASTER FOR ROOF TILE PRODUCTION
Water/Plaster Ratio	%50 & %38
Initial Setting	5-6 minutes
Final Setting	12-14 minutes
Compression Strength after 2 hours (min.)	150kg f/cm2 & 210 kg f/cm2
Absorption Capacity (by weight )	%25 & %9
Fineness	% 0.0 retains on 0.2 mm sieve
ABS CORNICE PLASTER
Water/Plaster Ratio	%75
Initial Setting	8-12 minutes
Final Setting	25-30 minutes
Compression Strength (min.)	100kg f/cm2
Absorption capacity (by weight )	%42
Fineness	% 0.0 retains on 0.2 mm sieve
Hardness	50 shore D.

PLATE
TECHNICAL SPECIFICATIONS

Properties and Advantages

Fire Resistant

It is resitant to direct oxyhydrogen flames, does not produce smoke and does not deform with exposure to fire for a long period time.

Reflects Lights

With its property to reflect the light more than 75% decorative gypsum ceilings brighten up the rooms.

Does Not Discolour

Gypsum suspended ceilings maintain their original colour with time, and does not discolour even if they are exposed to direct sunlight.

Paintable

Gypsum suspended ceilings can be painted any time even after mounted.

Resistant To Flexion

Gypsum ceiling panels are reinforced with special fibres which give a high resitance against flexion.

Provides Acoustic Comfort

The high density of the material, the structure of the surface, the microfissures and the use of special fibres give the panels very good sound absorption characteristics, ideal for user in public environments (supermarkets, schols, shopping malls etc.)

Hygrometry

ABS Plate regulates the humidity of the environment in an optimal way, absorbing the excess humidity without any consequences in its physical charachterictics, and re-establishing the environmental humidity during dry periods.

Ecological

Gypsum suspended ceiling do not contain asbestos, synthetic wools or any other toxic material and does not produce any fumes or toxic gases.

Levelled Surfaces

ABS Plate is produced with a high technology to obtain a precise dimension and smooth surface

Fast Installation

The highly devloped fixed joint system of the metal section bars and the lightness of the panels guarantee that the gypsum suspended celing is rapidly and simply installed.