| |
GYPSUM PLASTER
TECHNICAL SPECIFICATIONS
| Water/Plaster Ratio |
6,0-6,5 lt /10 kg |
| End of Setting |
150 - 180 minutes |
| Limiting single coat application thickness.(min.) |
5mm. |
| Consumption (1cm thickness) |
10 kg/m2 |
| Drying Time |
4 days |
| Absorption Capacity (by weight) |
32% |
| Hardness |
40 Shore D |
| Density (set & dried) |
1,150 kg/m3 |
| Tensile-Bending Strength (min.) |
1,0 N/mm² |
| Compressive Strength (min.) |
2,5 N/mm² |
| Thermal Conductivity |
0,30 W/mK(0,26 Kcal/mhC) |
|
|
 |
|
|
| |
M95 GYPSUM SPRAY PLASTER
TECHNICAL SPECIFICATIONS
| Water/Plaster Ratio |
5,4-5,8 lt / 10 kg |
| End of Setting |
150-180 minutes |
| Limiting Single Coat Application Thickness (min.) |
7 mm |
| Drying Time |
4 days |
| Tensile-Bending Strength (min.) |
1,0 N/mm² |
| Compressive Strength (min.) |
2,5 N/mm² |
| Hardness |
50 Shore D |
| Consumption (1cm thickness) |
10.5 kg/cm2 |
SATEN FINISH PLASTER
TECHNICAL SPECIFICATIONS
| Water/Plaster Ratio |
6,5 lt / 10 kg |
| End of Workability |
90 minutes |
| End of Setting |
160 – 200 minutes |
| Consumption (1mm thickness ) |
1 kg/m2 |
| Practical single coat application thickness |
0,5mm |
| Drying Time (max.) |
2 days |
| Water Absorption (by weigth) |
%17 |
| Hardness |
50 Shore D |
| Tensile-Bending strength (min.) |
1,0 N/mm² |
| Compressive Strength (min.) |
2,5 N/mm² |
| Thermal Conductivity |
0,30 W/mK (0,26 Kcal/mhc) |
GYPSUM PLASTERBOARD
TECHNICAL SPECIFICATIONS
Higher strength and fire resistance with additional fiber content,
Fast, clean, drywall partitioning and false ceiling installation,
Maximum flexibility in design and application,
Easily accommodates both mechanical and electrical services,
High-performance heat and sound isolation possibilities,
Improvement in fire resistance,
Less dead load and ideal for secure construction in risky areas to Earthquake,
Smooth and sound surfaces for any kind of paint or wallpaper application
TYPES
(R)Regular Gypsum Plasterboard
(WR) Water Resistant Gypsum Plasterboard
(FR) Fire Resistant Gypsum Plasterboard
(WR+FR) Water & Fire Resistant Gypsum Plasterboard
ADHESİVE AND FIXING PLASRERS
TECHNICAL SPECIFICATIONS
| ABS ADHESIVE FOR GYPSUM PLASTERBOARD |
| Water/Plaster Ratio |
4.8 lt/10 kg |
| Compressive Strength (min.) |
60 kg f/cm2 |
| Bending-Tensile Strength (min.) |
25 kg f/cm2 |
| End of Workability |
25 minutes |
| End of Setting |
60 minutes |
| Fineness |
% 10 retains on 0.2mm sieve |
| ABS JOINT FILLER FOR GYPSUM PLASTERBOARD |
| Water/Plaster Ratio |
5.4 lt/10 kg |
| Compressive Strength (min.) |
30 kg f/cm2 |
| Bending-Tensile Strength (min.) |
15 kg f/cm2 |
| End of Workability |
60 minutes |
| End of Setting |
150 minutes |
| Fineness |
% 0.0 retains on 0.2mm sieve |
| DUVAL GYPSUM PARTITION BLOCK ADHESIVE |
| Water/Plaster Ratio |
7.0 lt /10 kg |
| Compressive Strength (min.) |
30kg f/cm2 |
| Bending-Tensile Strength (min) |
10 kg f/cm2 |
| End of Workability |
40 minutes |
| End of Setting |
90 minutes |
| Fineness |
% 0.0 retains on 0.2mm sieve |
DUVAL GYPSUM PARTITION BLOCK
TECHNICAL SPECIFICATIONS
| Dimension |
50x66.6x8 cm. |
| Density |
1.0 kg/dm³ |
| Partition Weight |
84 kg/m² |
| Compressive Strength (min.) |
50 kg/cm² |
| Bending-Tensile Strength (min.) |
20 kg/cm² |
| Hardness |
40 Shore-D |
| Sound Rating |
39 dB |
| Vapour Diffusion Coefficent (µ) |
4 |
| Thermal Conductivity |
0.31 kcal/mh°C |
| Thermal Transmittance (1/h) |
0.26 m²h°C/kcal |
| Fire Resistance |
3 Hours |
MOULDING PLASER
TECHNICAL SPECIFICATIONS
| ABS CERAMIC MOULDING PLASTER |
| Water/Plaster Ratio |
%70 |
| Spread Diameter |
180 mm – 200 mm |
| Initial Setting |
12-15 minutes |
| Final Setting |
30-35 minutes |
| Compressive Strength (min.) |
125kg f/cm2 |
| Flexural Strength (min.) |
50 kg f/cm2 |
| Absorption Capacity (by weight) |
%38 |
| Fineness |
% 0.0 retains on 0.2mm sieve |
| Hardness |
60 shore D. |
| ABS PLASTER FOR ROOF TILE PRODUCTION |
| Water/Plaster Ratio |
%50 & %38 |
| Initial Setting |
5-6 minutes |
| Final Setting |
12-14 minutes |
| Compression Strength after 2 hours (min.) |
150kg f/cm2 & 210 kg f/cm2 |
| Absorption Capacity (by weight ) |
%25 & %9 |
| Fineness |
% 0.0 retains on 0.2 mm sieve |
| ABS CORNICE PLASTER |
| Water/Plaster Ratio |
%75 |
| Initial Setting |
8-12 minutes |
| Final Setting |
25-30 minutes |
| Compression Strength (min.) |
100kg f/cm2 |
| Absorption capacity (by weight ) |
%42 |
| Fineness |
% 0.0 retains on 0.2 mm sieve |
| Hardness |
50 shore D. |
PLATE
TECHNICAL SPECIFICATIONS
| Properties and Advantages |
| Fire Resistant |
| It is resitant to direct oxyhydrogen flames, does not produce smoke and does not deform with exposure to fire for a long period time. |
| Reflects Lights |
| With its property to reflect the light more than 75% decorative gypsum ceilings brighten up the rooms. |
| Does Not Discolour |
| Gypsum suspended ceilings maintain their original colour with time, and does not discolour even if they are exposed to direct sunlight. |
| Paintable |
| Gypsum suspended ceilings can be painted any time even after mounted. |
| Resistant To Flexion |
| Gypsum ceiling panels are reinforced with special fibres which give a high resitance against flexion. |
| Provides Acoustic Comfort |
| The high density of the material, the structure of the surface, the microfissures and the use of special fibres give the panels very good sound absorption characteristics, ideal for user in public environments (supermarkets, schols, shopping malls etc.) |
| Hygrometry |
| ABS Plate regulates the humidity of the environment in an optimal way, absorbing the excess humidity without any consequences in its physical charachterictics, and re-establishing the environmental humidity during dry periods. |
| Ecological |
| Gypsum suspended ceiling do not contain asbestos, synthetic wools or any other toxic material and does not produce any fumes or toxic gases. |
| Levelled Surfaces |
| ABS Plate is produced with a high technology to obtain a precise dimension and smooth surface |
| Fast Installation |
| The highly devloped fixed joint system of the metal section bars and the lightness of the panels guarantee that the gypsum suspended celing is rapidly and simply installed. |
|
|
